Current position > Product detail
『Turbines Inc. Flow Meter Repair Kits: Factory Authorized Reconditioning Tools』Related information(v cone flow meter|rotary gas meter|gallon meter|gear meter|metal tube rotameter|glass tube rotameter|nutating disk meter|transit time ultrasonic flow meter|wedge flow meter|pd meters|hydraulic flow meter|ultrasonic water flow meter|water flow meter|air flow meter|magnetic water flow meter|oxygen flow meter|gas flow meter|argon flow meter|air velocity meter|gasoline flow meter|fuel flow meter|ultrasonic water meter|digital water meter|nitrogen flow meter|solid flow meter|Oxygen tank flow meter|digital water flow meter|diesel fuel flow meter|steam flow meter|02 flow meter|compressed air flow meter|oil flow meter|liquid flow meter)
Turbines Inc. Flow Meter Repair Kits: Factory Authorized Reconditioning Tools
Quick Answer: Silver Automation Instruments supplies Turbines Inc flow meter repair kits and factory authorized reconditioning tools for DN15 to DN200 turbine meters. You get matched rotors, bearings, shafts, O-rings, and calibration fixtures that meet factory tolerances. Send us your meter model, fluid, pressure, temperature, pipe size, and flow range for a same day quote.
What These Repair Kits Include
We sell repair kits for Turbines Inc turbine flow meters used in fuel loading, water injection, chemical batching, and palm oil transfer. A standard kit covers one meter overhaul. You receive a 316 stainless steel rotor, tungsten carbide shaft, PEEK bearings, PTFE O-rings, retaining rings, a magnet housing, and a preload spring.
Parts are cleaned, measured, and packed in a single box. We include a tolerance report for the rotor and shaft. The tolerance report helps your maintenance team prove the repair stayed within factory limits.
Factory Authorized Reconditioning Tools
Reconditioning a turbine meter without the right tools causes rotor drag, bearing damage, or K-factor drift. We supply the factory authorized tools for Turbines Inc meter service. The set includes a bearing removal mandrel, a rotor alignment pin, a shaft runout gauge, a magnetic pickup test box, and a K-factor verification fixture.
Most engineers skip one step: they install a new rotor but do not check shaft runout. In practice, a bent shaft of 0.02 mm can cut pulse output stability by 3 percent or more. The runout gauge in this set removes that guess.
Which Models and Sizes We Support
We stock repair kits for DN15, DN20, DN25, DN40, DN50, DN80, DN100, DN150, and DN200 Turbines Inc meter bodies. We can also source parts for DN250 and DN300 on request. Kits match ANSI 150, ANSI 300, DIN PN16, and DIN PN40 flange patterns.
The same kit family covers low viscosity solvents, diesel, jet fuel, palm oil, and water with viscosities from 0.5 cP to 100 cP. For higher viscosity above 100 cP, a positive displacement meter usually performs better. We tell clients this before they order so they do not buy the wrong repair route.
Technical Details That Matter
A Turbines Inc flow meter repair kit is not only about mechanical parts. You also need to verify the magnetic pickup, the preamplifier, and the output signal after reassembly. We supply pickup test boxes that simulate rotor speed and confirm pulse output.
Typical output options include a raw frequency pulse, 4-20 mA HART, and Modbus RTU. If your meter has a PT100 RTD for temperature correction, order the sensor replacement kit at the same time. That saves a second shutdown.
Pressure rating for standard repair kits is 100 bar. Temperature range is -40 °C to +120 °C. For ATEX Zone 1 or IECEx installations, use the explosionproof pickup and the factory sealing kit. We have supplied Zone 1 repair parts for fuel depots in the Philippines, water injection skids in Oman, and chemical batch plants in Mexico.
What We Need to Quote
We do not ask for a full tender package. Send us the Turbines Inc model code, meter serial number, DN size, fluid type, operat
_600x400.jpg)
Because repair kits differ by bearing material and rotor design, we ask for the meter serial number before quoting. This prevents mismatched parts and returns.
Repair kits usually leave our Nanjing warehouse in 7 to 10 days. Reconditioning tools require 14 days because each gauge and fixture receives a final calibration check against a master rotor. We ship by DHL, FedEx, or sea freight to Southeast Asia, Oceania, Latin America, Africa, and the Middle East.
Prices and Lead Times
Prices depend on meter size and wetted material. A DN15 to DN25 repair kit with 316 stainless steel rotor and PEEK bearings starts at USD 120. A DN50 to DN80 kit with tungsten carbide shaft and explosionproof pickup starts at USD 280. A DN100 to DN200 kit ranges from USD 420 to USD 680. The factory authorized reconditioning tool set is quoted separately because customers often buy it once for a regional service shop.
We have seen a paint manufacturer in Southeast Asia reduce repair downtime from five days to eight hours after keeping one DN50 kit and one alignment pin on the shelf. That is the practical reason to buy the kit before the meter fails.
FAQ
Q: How do I know if my Turbines Inc flow meter needs a repair kit?
A: Look for unstable flow readings, low pulse output, rotor noise, or a K-factor drift above 1 percent. If the rotor does not spin freely or the bearing shows flat spots, order a repair kit before the meter body wears.
Q: Do these kits fit all Turbines Inc turbine meters?
A: They fit most liquid turbine meters from DN15 to DN200. You need to confirm the model code and serial number. Some custody transfer meters with special bearing materials require a matched kit.
Q: Can I install the repair kit without factory reconditioning tools?
A: You can replace basic parts, but you may not reach factory K-factor stability. We recommend the factory authorized tool set for any workshop that repairs more than three meters per year.
Q: What is the lead time to the Middle East or Latin America?
A: Repair kits ship in 7 to 10 days. Express freight takes 3 to 5 days after that. Reconditioning tools ship in 14 days because of final calibration.
Q: Do you supply repair kits for gas turbine flow meters?
A: We focus on liquid turbine meter repair kits. For gas service, send us the meter model and gas composition. We can confirm whether a compatible kit is available from stock or needs factory matching.
Contact Silver Automation Instruments
Tell us your pressure in bar, temperature in °C, pipe size in DN, and flow range. We will quote the correct Turbines Inc flow meter repair kit and reconditioning tools. Contact Tel: +86-135-1213-1526. Whatsapp: 86-135-12131526. WeChat: +86 13512131526.
Silver Instruments stocks repair kits for oil and gas, water and wastewater, chemical, food and beverage, and marine operations. If your site team is tired of waiting for factory service, keep one repair kit and one alignment tool in your maintenance store.